Difference between revisions of "X engine"
m |
m |
||
| Line 1: | Line 1: | ||
[[Image:X-24-engine.GIF|thumb|right|A simplified diagram of an X24 engine.]]An '''X engine''' is a [[piston engine]] comprising twinned [[v_engine|V-block engines]] horizontally-opposed to each other. Thus, the cylinders are arranged in four banks, driving a common [[crankshaft]]. Viewed head-on, this would appear as an X. Since [[24-cylinder]] models were the predominant configuration, it is most likely (but not known) that the angles between banks would have been 60-120-60-120, and not 90-90-90-90, since V-12 engines most commonly use a 60-degree bank to improve [[engine vibration]] characteristics. X-engines were often [[coupled engines]] derived from existing powerplants. | [[Image:X-24-engine.GIF|thumb|right|A simplified diagram of an X24 engine.]]An '''X engine''' is a [[piston engine]] comprising twinned [[v_engine|V-block engines]] horizontally-opposed to each other. Thus, the cylinders are arranged in four banks, driving a common [[crankshaft]]. Viewed head-on, this would appear as an X. Since [[24-cylinder]] models were the predominant configuration, it is most likely (but not known) that the angles between banks would have been 60-120-60-120, and not 90-90-90-90, since V-12 engines most commonly use a 60-degree bank to improve [[engine vibration]] characteristics. X-engines were often [[coupled engines]] derived from existing powerplants. | ||
| + | |||
| + | [[Image:Isotta-Fraschini Zeta R.C..jpg|thumb|left|300px|<center>Isotta-Fraschini Zeta R.C. 24/60</center>]] | ||
This configuration is extremely uncommon, primarily due its weight and complexity as compared to a [[radial engine]]. However, it was more compact (per number of cylinders) than a V-engine. In practice, the X-engine inherited the drawbacks of both inline and radial designs rather than their advantages. Overheating was a perpetual problem for X engines, and a major reason for the failure of the type. | This configuration is extremely uncommon, primarily due its weight and complexity as compared to a [[radial engine]]. However, it was more compact (per number of cylinders) than a V-engine. In practice, the X-engine inherited the drawbacks of both inline and radial designs rather than their advantages. Overheating was a perpetual problem for X engines, and a major reason for the failure of the type. | ||
| Line 9: | Line 11: | ||
*[[Rolls-Royce Vulture]], an [[x-24_engine|X-24]] based on two [[Rolls-Royce Peregrine|Peregrines]] and the powerplant of the ill-fated [[Avro Manchester]] bomber and the [[Hawker Tornado]] fighter. | *[[Rolls-Royce Vulture]], an [[x-24_engine|X-24]] based on two [[Rolls-Royce Peregrine|Peregrines]] and the powerplant of the ill-fated [[Avro Manchester]] bomber and the [[Hawker Tornado]] fighter. | ||
*[[Napier Cub]], a water cooled X-16 engine of the 1920's, which powered the prototype [[Blackburn Cubaroo]] torpedo bomber. | *[[Napier Cub]], a water cooled X-16 engine of the 1920's, which powered the prototype [[Blackburn Cubaroo]] torpedo bomber. | ||
| + | |||
| + | |||
| + | |||
| + | |||
Revision as of 10:03, 30 June 2007
An X engine is a piston engine comprising twinned V-block engines horizontally-opposed to each other. Thus, the cylinders are arranged in four banks, driving a common crankshaft. Viewed head-on, this would appear as an X. Since 24-cylinder models were the predominant configuration, it is most likely (but not known) that the angles between banks would have been 60-120-60-120, and not 90-90-90-90, since V-12 engines most commonly use a 60-degree bank to improve engine vibration characteristics. X-engines were often coupled engines derived from existing powerplants.
This configuration is extremely uncommon, primarily due its weight and complexity as compared to a radial engine. However, it was more compact (per number of cylinders) than a V-engine. In practice, the X-engine inherited the drawbacks of both inline and radial designs rather than their advantages. Overheating was a perpetual problem for X engines, and a major reason for the failure of the type.
Most examples of X-engines are from the World War II era, and were designed for large military aircraft. The following are examples of this engine type:
- Isotta-Fraschini Zeta R.C. 24/60, an X-24 developed for the Caproni F6 fighter, but never fully completed before Italy’s surrender in 1943.
- Daimler Benz DB 604, an X-24 developed for the Luftwaffe’s Bomber B program. Development suspended.
- Rolls-Royce Vulture, an X-24 based on two Peregrines and the powerplant of the ill-fated Avro Manchester bomber and the Hawker Tornado fighter.
- Napier Cub, a water cooled X-16 engine of the 1920's, which powered the prototype Blackburn Cubaroo torpedo bomber.
| Piston engine configurations | |
|---|---|
| Straight | Single, 2, 3, 4, 5, 6, 8, 9, 10, 12, 14 |
| V | 2, 4, 5, 6, 8, 10, 12, 16, 20, 24 |
| Flat | 2, 4, 6, 8, 10, 12, 16, H |
| W | 8, 9, 12, 16, 18 |
| Other inline | H, VR, Opposed, U (Square), X |
| Other | Hemi, Radial, Rotary, Pistonless, Deltic, (Wankel) |